HONDAINTEGRA 2018 - Present
The design of the Integra’s liquid-cooled, SOHC 8-valve parallel twin-cylinder engine ensures punchy performance in the low-to-mid range. Its relatively long-stroke architecture and specially shaped combustion chambers combine with the high-inertial mass crankshaft to produce large amounts of effortless torque from very low rpm. Peak power is 53.6 HP (40.3 kW) @ 6,250rpm with maximum torque of 68 Nm (50.2 lb-ft)@ 4,750rpm. For 2018, the rpm limit has been raised to 7,500rpm to allow natural use of the engine performance into a higher rpm range.
HONDAINTEGRA 2018 - Present Specs
| Type: |
Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinde |
| Displacement: |
745 cm3 |
| Bore X Stroke: |
3.0x3.1 in OR 76 mm |
| Compression Ratio: |
10.7:1 |
| Horsepower: |
55/6250 KW(hp)/RPM |
| Torque: |
50/4750 lb-ft/RPM OR 68/4750 Nm/RPM |
| Fuel System: |
PGM-FI electronic fuel injection |
| Gearbox: |
6-Speed Dual Clutch Transmission |
| Clutch: |
Wet multiplate hydraulic 2-clutch |
| Primary Drive: |
- |
| Final Drive: |
Chain |
| Frame: |
Diamond, steel pipe |
| Front Suspension: |
41mm telescopic fork, 120mm stroke |
| Rear Suspension: |
Monoshock damper, Pro-Link swingarm, 120mm travel |
| Front Brake: |
320mm single wavy hydraulic disc with 2-piston caliper and sintered metal pads |
| Rear Brake: |
240mm single wavy hydraulic disc with single-piston caliper and resin mold pads |
| Overall Length: |
87.2 in OR 2215 mm |
| Overall Width: |
31.9 in OR 810 mm |
| Seat Height: |
31.1 in OR 790 mm |
| Wheelbase: |
60 in OR 1524 mm |
| Ground Clearance: |
5.3 in OR 135 mm |
| Weight: |
525 lbs OR 238 kg |
| Fuel Capacity: |
3.7 gallons OR 14.0 L |
| Front: |
120/70-ZR17M/C (58W) |
| Rear: |
160/60-ZR17M/C (69W) |
| Power pack: |
- |
| Nominal Capacity: |
- |
| Maximum Capacity: |
- |
| Charger type: |
- |
| Charging time (normal): |
- |
| Charging time (quick): |
- |
| Range: |
- |
Related HONDAINTEGRA 2018 - Present info
Copyright 2023-2025 -
www.zzdcar.com All Rights Reserved