DUCATI250 Monza 1968 - 1972
The 1968 Ducati 250 Monza was inspired by the 250 F3 Racer rode by Franco Villa in official races. It had, at its heart, an air-cooled, four-stroke, 249cc, single cylinder desmodromic engine mated to a five-speed manual transmission, and could produce a claimed 21 horsepower at 7200 rpm.
Also, it had standard features such as a drum braking system both in the front and in the rear, pull-back handlebars, a dual seat, laced wheels, a chromed exhaust system, a suspension package composed of a hydraulic telescopic fork in the front and dual shocks in the rear, a center stand and a small, round headlight.
DUCATI250 Monza 1968 - 1972 Specs
| Type: |
air-cooled, four-stroke, single cylinder, SOHC, desmodromic |
| Displacement: |
249 cm3 |
| Bore X Stroke: |
2.9x2.3 in OR 74 mm |
| Compression Ratio: |
8.5:1 |
| Horsepower: |
21/7200 KW(hp)/RPM |
| Torque: |
0/- lb-ft/RPM OR 0 Nm/RPM |
| Fuel System: |
29mm DellOrto carburetor |
| Gearbox: |
5-speed, manual |
| Clutch: |
wet multi-disc, manual |
| Primary Drive: |
- |
| Final Drive: |
chain |
| Frame: |
steel |
| Front Suspension: |
hydraulic telescopic fork |
| Rear Suspension: |
dual shocks |
| Front Brake: |
drum |
| Rear Brake: |
drum |
| Overall Length: |
- |
| Overall Width: |
- |
| Seat Height: |
- |
| Wheelbase: |
- |
| Ground Clearance: |
- |
| Weight: |
276 lbs OR 125 kg |
| Fuel Capacity: |
3.4 gallons OR 12.9 L |
| Front: |
2.75 -18 |
| Rear: |
3.00 -18 |
Related DUCATI250 Monza 1968 - 1972 info
Copyright 2023-2025 -
www.zzdcar.com All Rights Reserved