LAVERDACR 600 Cruiser 1987 - 1988
The 1988 MY Laverda CR 600 Cruiser sports an air-cooled, four-stroke, 571cc, parallel twin cylinder engine mated to a six-speed manual transmission and can produce 46 horsepower and 50 Nm of torque. It comes standard with gas-assisted telescopic forks, a monoshock as a rear suspension, Brembo dual 280 mm disc brakes in the front and a single 270 mm one in the rear, and rather small, cast-alloy wheels, of only 16" both in the front and in the back.
LAVERDACR 600 Cruiser 1987 - 1988 Specs
| Type: |
air cooled, four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180-degree crankshaft |
| Displacement: |
571 cm3 |
| Bore X Stroke: |
3.0x2.5 in OR 76 mm |
| Compression Ratio: |
9.1:1 |
| Horsepower: |
46/8500 KW(hp)/RPM |
| Torque: |
37/4800 lb-ft/RPM OR 50/4800 Nm/RPM |
| Fuel System: |
DellOrto twin choke carburetors |
| Gearbox: |
6-speed, manual |
| Clutch: |
- |
| Primary Drive: |
gears |
| Final Drive: |
chain |
| Frame: |
steel |
| Front Suspension: |
gas-assisted telescopic forks |
| Rear Suspension: |
monoshock |
| Front Brake: |
2x 280mm disc |
| Rear Brake: |
single 270mm disc |
| Overall Length: |
- |
| Overall Width: |
- |
| Seat Height: |
- |
| Wheelbase: |
- |
| Ground Clearance: |
- |
| Weight: |
397 lbs OR 180 kg |
| Fuel Capacity: |
4.8 gallons OR 18.2 L |
| Front: |
100/90 V16 |
| Rear: |
130/90 V16 |
Related LAVERDACR 600 Cruiser 1987 - 1988 info
Copyright 2023-2025 -
www.zzdcar.com All Rights Reserved