MOTO MORINI3 1/2 S 1974 - 1983
This is a famous Morini bike, based on the Franco Lambertini designed Strada. This machine was released in 1974 and has a lot of interesting aspects concerning the design. For example, the "Heron" head is used for this machine, meaning this kind of cylinder has a flat cylinder head with the combustion chamber machined on the top of the piston.
MOTO MORINI3 1/2 S 1974 - 1983 Specs
| Type: |
Air cooled, four Stroke, V-twin, OHV, 2 valves per cylinder |
| Displacement: |
344 cm3 |
| Bore X Stroke: |
2.44x2.24 in OR 62 mm |
| Compression Ratio: |
11.0:1 |
| Horsepower: |
39/8500 KW(hp)/RPM |
| Torque: |
24.8/6300 lb-ft/RPM OR 34/6300 Nm/RPM |
| Fuel System: |
2x25mm Dell'Orto Carburetors |
| Gearbox: |
6 Speed |
| Clutch: |
- |
| Primary Drive: |
- |
| Final Drive: |
Chain |
| Frame: |
- |
| Front Suspension: |
Telehydraulic forks |
| Rear Suspension: |
Swinging arm dual adjustable shocks |
| Front Brake: |
Single 254mm disc |
| Rear Brake: |
180mm drum |
| Overall Length: |
- |
| Overall Width: |
- |
| Seat Height: |
- |
| Wheelbase: |
- |
| Ground Clearance: |
- |
| Weight: |
- |
| Fuel Capacity: |
- |
| Front: |
3.25-18 |
| Rear: |
4.10-18 |
Related MOTO MORINI3 1/2 S 1974 - 1983 info
Copyright 2023-2025 -
www.zzdcar.com All Rights Reserved