SUZUKIRM250 PAUL EDMONDSON REPLICA 2007 - 2008
Developed and built in the UK by the four-time World Champion, the limited run machine has been put together with the aim of being the ‘ultimate’ out of the showroom two-stroke enduro weapon. Power delivery has been altered with a DEP expansion chamber and a carburettor spacer to the motocross RM250 motorcycles.
SUZUKIRM250 PAUL EDMONDSON REPLICA 2007 - 2008 Specs
| Type: |
Two stroke, single cylinder, liquid cooled |
| Displacement: |
249 cm3 |
| Bore X Stroke: |
2.6x2.8 in OR 66 mm |
| Compression Ratio: |
10.7:1 |
| Horsepower: |
-/- KW(hp)/RPM |
| Torque: |
0/- lb-ft/RPM OR 0 Nm/RPM |
| Fuel System: |
Keihin PWK38PWJ/TPS |
| Gearbox: |
5-Speed |
| Clutch: |
Wet, multiplate |
| Primary Drive: |
- |
| Final Drive: |
Chain |
| Frame: |
- |
| Front Suspension: |
Kayaba inverted cartridge, 18 step rebound, 20-step compression damping adjustable |
| Rear Suspension: |
Kayaba link-type, 18-step rebound, 3-turn high, 16-step low speed compression damping, preload adjustable |
| Front Brake: |
Single disc 250 mm |
| Rear Brake: |
Single disc 240 mm |
| Overall Length: |
- |
| Overall Width: |
- |
| Seat Height: |
38 in OR 965 mm |
| Wheelbase: |
- |
| Ground Clearance: |
- |
| Weight: |
- |
| Fuel Capacity: |
2.1 gallons OR 7.9 L |
| Front: |
100/90 -21 |
| Rear: |
110/90 -18 |
| Power pack: |
- |
| Nominal Capacity: |
- |
| Maximum Capacity: |
- |
| Charger type: |
- |
| Charging time (normal): |
- |
| Charging time (quick): |
- |
| Range: |
- |
Related SUZUKIRM250 PAUL EDMONDSON REPLICA 2007 - 2008 info
Copyright 2023-2026 -
www.zzdcar.com All Rights Reserved