TRIUMPHBonneville SE 2008 - 2009
The 2008 Bonneville SE brings in the same 70's attire of the base Bonnie, but with several upgrades on the visual side, to make it stand from the crowd. This new Bonnie receives matching tacho and speedometer gauges, polished alloy engine covers nicely contrasting with the blacked out engine and a bold Triumph tank badge.
At the same time, the bike was loaded with new cast wheels in contrast cut design, upswept silencers, a lower and narrower seat and the classic shortie front fender. The fuel injection system is cleverly disguised as a traditional carburetor setup, for an even neater retro look.
TRIUMPHBonneville SE 2008 - 2009 Specs
| Type: |
4-stroke air-cooled, DOHC, parallel-twin, 360-degree firing interval |
| Displacement: |
865 cm3 |
| Bore X Stroke: |
3.5x2.7 in OR 89 mm |
| Compression Ratio: |
9.2:1 |
| Horsepower: |
67/7500 KW(hp)/RPM |
| Torque: |
51/5800 lb-ft/RPM OR 69/5800 Nm/RPM |
| Fuel System: |
multipoint sequential electronic fuel injection with SAI |
| Gearbox: |
5-speed, manual |
| Clutch: |
wet, multiplate |
| Primary Drive: |
- |
| Final Drive: |
X ring chain |
| Frame: |
tubular steel cradle |
| Front Suspension: |
41mm forks |
| Rear Suspension: |
chromed spring twin shocks with adjustable preload |
| Front Brake: |
Single 310mm disc, 2 piston caliper |
| Rear Brake: |
Single 255mm disc, 2 piston caliper |
| Overall Length: |
84.3 in OR 2141 mm |
| Overall Width: |
29.4 in OR 747 mm |
| Seat Height: |
29.5 in OR 749 mm |
| Wheelbase: |
57.2 in OR 1453 mm |
| Ground Clearance: |
- |
| Weight: |
441 lbs OR 200 kg |
| Fuel Capacity: |
4.2 gallons OR 15.9 L |
| Front: |
110/70 R17 |
| Rear: |
130/80 R17 |
Related TRIUMPHBonneville SE 2008 - 2009 info
Copyright 2023-2026 -
www.zzdcar.com All Rights Reserved