zzdcar
Home
/
Reviews
/
Buying
/
For $14,900, make a powerful skate-ment
For $14,900, make a powerful skate-ment-October 2024
2024-02-19 EST 22:10:13

As the old adage goes, if you want something done right, you have to do it yourself. The creator of today's Maxton Rollerskate did it himself, but will the price of this über rare and basic sports car prove to have been done right?

Bob Sutherland owned a chain of lumber yards, organized the , and for a short time ran a car company. He also suffered for most of his adult life from bipolar disorder, a condition that he was able to manage, and for which in his honor was founded the .

Bob died in 1999 at age 56, but his legacy lives on in the vintage rally he started, the business he grew, and the Foundation that his family created in his name so that other suffers of depression may live as normal of lives as he did.

And then there are the about 50 Bob built.

An owner - and successful racer of - numerous vintage cars, Sutherland lamented that there was no contemporary equatable product on the market. This was back in the mid eighties, before the Miata's arrival, and while that car channeled the ghosts of British roadsters past, it would probably have proven too heavy and compromised to fulfill Sutherland's vision.

Assembling a team - which included auto designer Michael Mate, SCCA race car engineer Ben van der Linden, and suspension builder, Garry Valler - Sutherland set out to build a modern interpretation of the lightweight sports car - something a little more than a Lotus 7, and a little less than that company's Elan. The result looked like a melding of those two cars, with some Frogeye Sprite thrown in for good measure. The cut-down openings allowed egress without the weight of doors, while the lain on their side VW Bus tail lights look purpose built for the car. Overall, Mate's body design was at once reverent to its spiritual progenitors and wholly original.

Underneath, there's a purpose-built square tube frame to which double A-arm front suspension with Mustang II spindles and a Mazda RX7 live axle have been attached. The Mazda family line goes even deeper with the rest of the driveline as all of the Maxtons were powered by that company's Wankel engines.

When I say all the Maxtons, it should be clarified that that means all 50 cars. It should also be pointed out that these were not kit cars - they were component cars - completed in Maxton's Englewood CO factory save for the engine - which was up to the buyer to have installed. Unfortunately, few shared Sutherland's vision, and the company shuttered before any more cars could be mated with motors.

The engine in this is a 12A, fed through a throaty Dellorto sidedraught. That engine sits well-back of the front axle line making this a front-mid engine design, while like a Se7en, the driver and passenger sit even further back, nearly over the rear axle. Painted a two-tone black over silver, with a fat red stripe delineating the two, the car looks so fresh, it might have just left the factory.

A child of the '80s, the 6 x 13 alloys wrapped in 205-60VR-13 meats may seem quaintly diminutive by today's standards, but they do point to just how small the car is overall. Drum brakes in back, and discs up front may also call attention to the progress that has been made in the stopping department since its early ‘90s inception, but with only 1,630-lbs to pull down, they should still do just fine. The remainder of the parts - the Mustang II rack and pinion, Racing Beat limited slip diff, and Mazda 5-speed gearbox - will have years of parts availability ahead of them, leaving only the old-school round sealed beams to be of questionable sourcing down the road.

The dealer claims this Rollerskate has only rolled 1,300 miles down the road in total - a phenomenally small number considering the potential fun the car promises. Back when Maxton was cranking the cars out, Motorweek's Pat Goss put one together on the show, and then in a sweepstakes gave away the completed car to a happy PBS viewer. Goss has been quoted as saying the Rollerskate was his favorite of all the cars he's driven on that show. With a factory claimed zero to sixty time of 5.5 seconds, it's easy to see why.

Bob Sutherland may have fought bipolar disorder, but when it came to the Maxton, his vision was unique and singularly focused. This ‘Skate represents a rare opportunity to own the fruit of that vision, and a bit of American automotive history. To do so, a buyer will need to come up with American money, in the amount of $14,900. For those of you who are imagining all the nice Miatas you could buy for that kind of scratch - with their wind-up windows, airbags, and convertible tops that go up in seconds rather than requiring a troop of boy scouts - keep thinking that, this may not be the car for you.

For the rest of us - those drooling over that nothing wasted body and itching to twist the center-dash mounted ignition key - let's reflect a moment on that price. Okay, moment's up, time to vote. What do you say, is $14,900 a price that makes this Maxton a must? Or, does that make this a car you would skate on by?

You decide!

or go if the ad disappears.

Help me out with NPOCP. Click to send a me a tip, and remember to include your commenter handle.

Yes, I know you can't see the poll. Vote in the comments, email and let ‘em know.

Comments
Welcome to zzdcar comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments
Buying
Acura Opens Reservations For the 2023 Acura TLX Type S PMC Edition
Acura Opens Reservations For the 2023 Acura TLX Type S PMC Edition
With the production of the , Acura’s Performance Manufacturing Center is now set to begin producing a limited number of. With production imminent, Acura is opening reservations for interested buyers. The TLX Type S PMC Editions set themselves apart from regular Type S models by being handbuilt at the...
Oct 19, 2026
At $13,500, Is This 1988 Nissan Stanza MPV the Next Radwood Star?
At $13,500, Is This 1988 Nissan Stanza MPV the Next Radwood Star?
With its 4WD and B-pillar-less mega-door openings, today’s Stanza has some really cool features. Let’s see what we think it should rightfully cost in cold hard cash. It took five minutes and nine votes before anyone had a positive opinion on yesterday’s , at that point turning the results...
Oct 19, 2026
A Lot of You Are Paying More Than $1,000 a Month for Your Car and It's a Little Worrying
A Lot of You Are Paying More Than $1,000 a Month for Your Car and It's a Little Worrying
Edmunds, which is an automotive analytics and data firm, has a new report out, which says that the average monthly payment for new cars is now more than $700, which is completely ridiculous. This is in part because car loan interest rates are . A little over 14 percent...
Oct 19, 2026
Toyota Will Do Up a Plug-In Hybrid Crown Eventually: Report
Toyota Will Do Up a Plug-In Hybrid Crown Eventually: Report
The forthcoming is a strange proposition, and I’m still not sure where it fits in a world where Lexus also exists, but Toyota is going to give it a shot in the States anyway. Leading the charge will be the — sort of a replacement for the Avalon, but...
Oct 19, 2026
Ford Commemorates the 2016 Le Mans-Winning Ford GT LM With New Ford GT LM Edition Ford GT
Ford Commemorates the 2016 Le Mans-Winning Ford GT LM With New Ford GT LM Edition Ford GT
Ford has been working on retiring its for a while now, with many special editions inspired by historic racing liveries. Now, according to an announcement by Ford, they’re closing down the bar and turning on the lights with this last special edition, dubbed the GT LM. The GT LM...
Oct 19, 2026
Tesla Bails on Ultrasonic Sensors for Future Production, Report Says
Tesla Bails on Ultrasonic Sensors for Future Production, Report Says
If there’s one thing that Tesla loves, it’s hyping up the capabilities of its Autopilot driver assistance system. I mean, hot damn, they love talking about how much safer it is than a human driver and how it’s going to lead to robotaxis in the future and a bunch...
Oct 19, 2026
Copyright 2023-2026 - www.zzdcar.com All Rights Reserved