The road to a has been . Almost as bumpy and uneven as the first Cybertrucks coming out of the Austin Gigafactory, which have reportedly been so bad that they prompted to send an urgent email to Tesla employees. In the message, in the production process of the EV pickup, with Musk going on to reference the famously tight tolerances of and soda cans to inspire his workers to build better Cybertrucks. It goes without saying that the time to ask for from your own company, let alone the suppliers building parts for the thing would be several years ago, before the car was “headed for production.” But we’re all learning as we go in this life.

But a better Cybertruck would only be possible through a complete redesign, according to , which cites car designer and contributor . The issues come down to the impossibly flat body panels of the Cybertruck. Given the design of the EV, small imperfections inherent in the production process are all the more clear, as Clarke tells :

Professor X believes that Tesla can attain such precision, but Clarke questioned the demand in an email he sent me today. “Is totally infeasible for production. Body panel tolerances are measured in whole mm to allow for variance in assembly and the tolerance stack!” This is also nonsense because, as he points out, it doesn’t take into account the thermal expansion and contraction of vehicles that come into play during the manufacturing and operation of the vehicle.

Musk is aware of these issues, but he seems convinced that tighter tolerances will be the fix the Cybertruck needs — again, the thing is supposedly close to production andis notably not a single stamped/moulded/cast piece. This ignores other practical problems that have led to multiple delays in bringing the EV to market. Per :

Musk promised this pickup in 2021 and didn’t deliver. Then he said production was coming in 2022, but that year came, and to early 2023. Now it’s been delayed again till “.” Tesla , but Clarke and are skeptical it will ever happen—at least, not without a serious redesign. “As soon as we saw [the Cybertruck], everyone I know in the industry started laughing. We just thought there is no way they’re gonna be able to get that into production.” There’s no way, he assures me, because it’s not going to pass crash regulations, it’s not going pass pedestrian impact regulations, and, more importantly, it’s going to be extremely hard to make those “those dead straight panels.”

Still, Musk is soldiering on with the Cybertruck despite its unprecedented design, which remains unprecedented for good reason: it makes production difficult and repairs nearly impossible.

I get the impulse to design something . Really, I do. But there’s a difference between something minimalist and something reductive. The Cybertruck strikes me as an attempt at the former that went off the rails and arrived at the latter. A bad joke that started with Elon Musk or someone else at Tesla saying “what if we did this instead...” followed by uproarious laughter at crudely drawn lines and four circles. Behold, the Cybertruck, said some genius and no one dared to question the so-called .

The problem is that the bit went too far. That is, if the ever makes it to .